CLI change log
In the command line, you are notified when updates to the ibmcloud
CLI and plug-ins are available. Be sure to keep your CLI up-to-date so that you can use all available commands and options.
Refer to the following change logs for a summary of changes for each version of the Red Hat OpenShift on IBM Cloud plug-in, which uses the ibmcloud oc
alias.
Version 1.0
Review the following changes for 1.0 versions of the CLI plug-in.
Version v1.0.652
Version 1.0.652 of the CLI was released on 23 August 2024.
- Makes the
ibmcloud sat agent
and theibmcloud sat endpoint authn
andibmcloud sat acl
commands not experimental. - Fixes GraphQL bugs and help text improvements.
- Updates the expiration date format for
experimental
commands. - Extends the expiration date of
connector
commands. - Updates the
ibmcloud sat location dns register
command to no longer require exactly 3 IP addresses. - Adds the
ibmcloud sat agent ls
command. - Adds the
enable
anddisable
commands to theibmcloud sat endpoint
group. - Updates entitlement options to use
ocp_entitled
instead ofcloud_pak
, and indicatesworker-pool
as required when it is required. - Makes the
--worker-pool
option required for thezone add
,zone rm
, andzone network-set
commands.
Version v1.0.640
Version 1.0.640 of the CLI was released on 17 July 2024.
- Changes the
--entitlement cloud_pak
option in thecluster create
command to be--entitlement ocp_entitled
to allow for other entitlements besides Cloud Paks. - Adds the
--worker-pool POOL
option to theibmcloud oc zone add
,ibmcloud oc zone network set
, andibmcloud oc zone network rm
commands.
Version v1.0.638
Version 1.0.638 of the CLI was released on 12 July 2024.
- Adds
ibmcloud sat experimental endpoint acl
commands. - Adds support for the beta
ibm-object-csi-driver
add-on. - Updates error messages.
Version v1.0.635
Version 1.0.635 of the CLI was released on 10 July 2024.
- Adds storage operator add-on commands.
- Hides the
--dest-type
option from theibmcloud sat endpoint update command
.
Version v1.0.632
Version 1.0.635 of the CLI was released on 09 July 2024.
- Adds the
--physical-address
and--capability value
options to theibmcloud sat location create
command.
Version v1.0.630
Version 1.0.630 of the CLI was released on 24 June 2024.
- Updates the validation logic on the
worker-pool resize
command.
Version v1.0.628
Version 1.0.628 of the CLI was released on 17 June 2024.
- Adds support for managing endpoints for Satellite Connectors by using the the
--connector-id
option in theibmcloud sat connector endpoint
commands. - Adds the
--idle-timeout-seconds
option toibmcloud sat connector endpoint create
andibmcloud sat connector endpoint update
. - Adds
ibmcloud sat experimental endpoint authn set
command andibmcloud sat experimental endpoint authn rotate
commands.
Version v1.0.618
Version 1.0.618 of the CLI was released on 02 May 2024.
- Extends the experimental date of the
ibmcloud sat experimental connector
commands to 01 July 2024.
Version v1.0.617
Version 1.0.617 of the CLI was released on 24 April 2024.
Version v1.0.613
Version 1.0.613 of the CLI was released on 18 April 2024.
Version v1.0.601
Version 1.0.601 of the CLI was released on 27 February 2024.
- Adds the
--disable-outbound-traffic-protection
option for theibmcloud oc cluster create vpc-gen2
command.
Version v1.0.597
Version 0.1.597 of the CLI was released on 27 February 2024.
- Adds the
[-f]
option for theibmcloud sat connector remove
command.
Version v1.0.595
Version 0.1.595 of the CLI was released on 08 February 2024.
- Adds the
ibmcloud sat storage assignment autopatch
command for enabling and disabling automatic patch updates to your Satellite storage assignments. - Adds the
patch
alias to theibmcloud sat storage assignment upgrade
command.
Version v1.0.589
Version 0.1.589 of the CLI was released on 19 January 2024.
- Adds the
sat experimental connector agent
commands. - Deprecates the
private service endpoint disable
commands. - Updates to experimental commands.
- Resolves CVE-2023-48795.
- Upgrades the golang version.
- Updates the phrasing of various commands and help text strings.
Version v1.0.579
Version 0.1.579 of the CLI was released on 7 November 2023.
- Deprecates
logging collect
commands. - Removes beta tag for
sat storage assignment
commands.
Version 0.1.573
Version 0.1.573 of the CLI was released on 10 October 2023.
- Deprecates the various
logging
commands. - Updates the help text in various languages.
Version v1.0.566
Version 1.0.566 of the CLI was released on 18 September 2023.
- Updates the phrasing of various commands and help text strings.
- Updates the help text in various languages.
Version v1.0.540
Version 1.0.540 of the CLI was released on 19 July 2023.
- Adds new
ibmcloud oc ingress alb autoscale
commands. - Replaces the deprecated
ibmcloud oc alb ls
command in certain command help texts. - Updates the help text in various languages.
Version v1.0.528
Version 1.0.528 of the CLI was released on 26 June 2023.
- Removes unnecessary translations.
- Updates to
ibmcloud sat cluster register
command better recognize response headers. - Adds Satellite connector CLI commands.
- Removes unnecessary translations.
- Adds support for multiple default cluster add-on versions depending on cluster version. Updates
cluster addon versions
output. - Updates to
ibmcloud sat cluster register
command better recognize response headers. - Updates for pod security admission.
Version v1.0.523
Version 1.0.523 of the CLI was released on 25 May 2023.
- Adds doc links to command help.
- Updates description for the Satellite service endpoint allowlist command.
- Updates CLI to handle the new multiple default add-on versions schema.
-
- Adds doc links to command help.
- Updates description for the Satellite service endpoint allowlist command.
- Updates CLI to handle the new multiple default add-on versions schema.
Version v1.0.516
Version 1.0.516 of the CLI was released on 16 May 2023.
- Updates
sat storage template
command outputs to include storage template provider details. - Updates the help text in various languages.
Version v1.0.510
Version 1.0.510 of the CLI was released on 11 April 2023.
- Adds support for Pod Security admission.
- Resolved an issue about config file race conditions.
- Updates the
ibmcloud oc ingress domain create
command output to return the full qualified domain.
Version v1.0.498
Version 1.0.498 of the CLI was released on 1 March 2023.
- Adds the
ibmcloud oc cluster master pod-security get
command. - Updates the
golang
version to resolve CVE-2022-41723. - Adds an
Architecture
field to theibmcloud oc flavor get
command output. - Improves formatting of the
ibmcloud oc ingress secret ls
command output. - When the
ibmcloud oc cluster config
command returns, you can runkubectl
oroc
commands immediately without a waiting period. - Adds the
--host-link-agent-endpoint
option to theibmcloud sat host attach
command.
Version 1.0.489
Version 1.0.489 of the CLI was released on 30 January 2023.
- Adds a fix where table headings are no longer printed if the output of a command contains no results.
- Adds the
--secondary-storage
option to thecluster create vpc-gen2
,worker-pool create vpc-gen2
, andflavor get
commands.
Version 1.0.487
Version 1.0.487 of the CLI was released on 24 January 2023.
- Adds the
satellite-service-endpoint allowlist
commands - Updates the help text in various languages.
Version 1.0.480
Version 1.0.480 of the CLI was released on 14 December 2022.
- Adjusted
ibmcloud oc flavor get
andibmcloud oc flavor ls
commands to show secondary storage details. - Introduced Secondary Storage Configuration for
worker-pool get
. - Added Ignored Errors to
ingress status-report
. - Updates
ibmcloud sat config create
andibmcloud sat subscription create
commands to support new options for GitOps.
Version 1.0.471
Version 1.0.471 of the CLI was released on 1 December 2022.
- Adds new endpoint type
vpe
(Virtual Private Endpoint) for cluster config command. - Updates the cluster get command to show VPE url.
- Adds
infrastructureTopology
field to cluster response. - Adds JSON output to Satellite get host command.
Version 1.0.459
Version 1.0.459 of the CLI was released on 21 October 2022.
- Adds the
--infrastructure-topology
option for theibmcloud oc cluster create satellite
command. - Adds new
ibmcloud oc flavor get
andibmcloud oc flavor ls
commands.
Version 1.0.454
Version 1.0.454 of the CLI was released on 3 October 2022.
- Adds new Ingress status commands.
- Adds the
--operating-system
option for the cluster create commands.
Version 1.0.452
Version 1.0.452 of the CLI was released on 21 September 2022.
- Updates the help text in various languages.
Version 1.0.446
Version 1.0.446 of the CLI was released on 12 September 2022.
- Adds
--pod-network-interface-selection
option to location create flow.
Version 1.0.444
Version 1.0.444 of the CLI was released on 8 September 2022.
- Adds Secrets Manager registration to cluster create flow.
- Adds worker-pool OS support.
- Removes Ingress migration command support.
Version 1.0.439
Version 1.0.439 of the CLI was released on 26 Aug 2022.
- Adds new commands to enable, disable, and get status of ALB health checker.
Version 1.0.433
Version 1.0.433 of the CLI was released on 5 Aug 2022.
- Updates the help text in various languages.
Version 1.0.431
Version 1.0.431 of the CLI was released on 15 Jul 2022.
- The
KMS Account ID
string is now translatable.
Version 1.0.430
Version 1.0.430 of the CLI was released on 13 Jul 2022.
- Adds the
--kms-account-id ID
option to various commands to support cross-account encryption for KMS enablement, VPC cluster, and worker pool creation.
Version 1.0.426
Version 1.0.426 of the CLI was released on 6 Jul 2022.
- Adds the
ibmcloud sat key
commands, allowing you to view and manage your Satellite Config keys. - Adds the
ibmcloud sat subscription identity set
command, which updates a Satellite subscription to use your identity to manage resources. - Adds the
--secret-group
option to various Secrets Manager commands. With this option, you can create secret groups to organize your secrets and control who on your team has access to them.
Version 1.0.422
Version 1.0.422 of the CLI was released on 20 June 2022.
- Makes the
template-version
option optional for theibmcloud sat storage config create
command. - Updates the output of the
ibmcloud sat storage template ls
andibmcloud sat storage template get
commands to specify if a version is deprecated or the current default template version.
Version 1.0.420
Version 1.0.420 of the CLI was released on 15 June 2022.
- Adds the new
ibmcloud sat storage config param set
command. /n 2. Updates theibmcloud sat storage template get
command output to indicate whether a storage config is mutable.
Version 1.0.419
Version 1.0.419 of the CLI was released on 7 June 2022.
- Implements various backend updates.
Version 1.0.415
Version 1.0.415 of the CLI was released on 26 May 2022.
- Updates the help text in various languages.
Version 1.0.408
Version 1.0.408 of the CLI was released on 6 May 2022.
- Fixes Ingress secret type backward compatibility.
- Deprecates the Ingress migration tool.
Version 1.0.404
Version 1.0.404 of the CLI was released on 28 April 2022.
- Adds features visible to select users only.
Version 1.0.403
Version 1.0.403 of the CLI was released on 26 April 2022.
- Adds support for M1 processor on Linux and macOS.
- Updates the help text in various languages.
Version 1.0.394
Version 1.0.394 of the CLI was released on 7 April 2022.
- Adds the
--operating-system
label toibmcloud oc worker-pool create satellite
andibmcloud oc cluster create satellite
.
Version 1.0.384
Version 1.0.384 of the CLI was released on 21 March 2022.
- Adds the
--output
option to theibmcloud oc storage assignment ls
andibmcloud oc storage config ls
commands.
Version 1.0.374
Version 1.0.374 of the CLI was released on 24 February 2022.
- Removes the default zone in the
ibmcloud oc cluster create satellite
command. - Fixes a routing issue for the
ibmcloud sat storage assignment create --cluster
and theibmcloud sat storage assignment ls --cluster
commands.
Version 1.0.372
Version 1.0.372 of the CLI was released on 18 February 2022.
- Modifies relevant commands to accept either the
--worker-pool
or-p
options for worker pool options. - Updates JSON outputs to include additional resources, such as add-ons, VLANs, and subnets.
- Makes
ibmcloud oc ingress
commands generally available. - Updates the
ibmcloud oc ingress alb get
command output to include ALB status. - Adds the new
ibmcloud oc nlb-dns get
command. - Adds the new
ibmcloud oc ca get
command. - Updates the
ibmcloud oc location get
command output to indicate whether the location has IaaS provider credentials stored. - Updates the
ibmcloud oc storage assignment ls
command to include the--config
option option, allowing you to list only storage assignments created with the specified configuration. - Updates the help text in various languages.
Version 1.0.353
Version 1.0.353 of the CLI was released on 3 December 2021.
- Updates the
ibmcloud sat location get
command output to includeIgnition Server Port
andKonnectivity Server Port
. - Updates the help text in various languages.
- Updates the help text in various languages.
Version 1.0.347
Version 1.0.347 of the CLI was released on 15 November 2021.
- Updates various output messages.
Version 1.0.344
Version 1.0.344 of the CLI was released on 15 November 2021.
- Includes a Go version update from
1.16.7
to1.16.10
and other fixes.
Version 1.0.334
Version 1.0.334 of the CLI was released on 26 October 2021.
- Adds the
ibmcloud oc cluster master private-service-endpoint disable
command. You can now disable private service endpoints to remove private accessibility to your cluster master. - Updates the help text in various languages.
Version 1.0.331
Version 1.0.331 of the CLI was released on 12 October 2021.
- Adds the
--output
option for theibmcloud sat storage get
command. - Adds the
--policy
option to theibmcloud oc master audit-webhook set
command. You can now configure the amount of information included in your cluster audits by specifying thedefault
orverbose
audit policy type.
Version 1.0.327
Version 1.0.327 of the CLI was released on 11 October 2021.
- Adds the
--data-location
option for theibmcloud sat config create
command and the--location
option for theibmcloud sat storage assignment ls
command. - Updates the help text in various languages.
Version 1.0.312
Version 1.0.312 of the CLI was released on 9 August 2021.
- Removes the
ibmcloud oc nlb-dns monitor status
command. Checking the health of individual IP addresses, which was previously supported by the Cloudflare DNS provider, is not supported by the Akamai DNS provider. Instead, you can check the overall health of a subdomain by using theibmcloud oc nlb-dns monitor ls
command. For more information on the migration to Akamai for allcontainers.appdomain.cloud
,containers.mybluemix.net
, andcontainers.cloud.ibm.com
domains, see the migration announcement. - Removes the
ibmcloud oc cluster addon enable kube-terminal
command. The Kubernetes web terminal add-on became unsupported on 1 July 2021. Instead, use the IBM Cloud Shell. - Adds CLI support for the OpenShift Data Foundation storage add-on.
- Makes the
ibmcloud oc cluster addon update
feature available to all users. - Includes the subscription status in the output of the
ibmcloud sat subscription get
andibmcloud sat subscription ls
commands. - Adds the option to display the output of the
ibmcloud sat subscription get
andibmcloud sat subscription ls
commands in JSON format. - Updates the help text in various languages.
- Displays OpenVPN Server Port details in the
ibmcloud sat location get
command output. - Updates the help text in various languages.
Version 1.0.300
Version 1.0.300 of the CLI was released on 12 July 2021.
- Adds the following parameters to the
ibmcloud sat location create
command so that you can optionally specify an infrastructure provider along with the region and credentials for the provider:--provider
,--provider-region
, and--provider-credential
. - Updates the help text in various languages.
Version 1.0.295
Version 1.0.295 of the CLI was released on 24 June 2021.
- Removes the unsupported Red Hat OpenShift on IBM Cloud Ingress image version from the output of
ibmcloud oc alb version ls
. - In all
ibmcloud oc cluster create
commands, updated the help text to indicate that you must set the--workers
option value to at least 2. - Adds the following updates for add-on commands: - Adds the
ibmcloud oc cluster addon get
command to view the details of an installed add-on. - Adds the
ibmcloud oc cluster addon options
command to view optional installation settings for an add-on. - Adds the
--param
option to specify an optional installation setting for theibmcloud oc cluster addon enable openshift-container-storage
command. - The
ibmcloud sat storage config
andibmcloud sat storage template
commands are now generally available. - Adds the
--cluster
and--service-cluster-id
option to theibmcloud sat storage assignment ls
command to filter output by the ID of a cluster that you created or the ID of a Satellite-enabled IBM Cloud service cluster. - Adds the
--service-cluster-id
option to theibmcloud sat storage assignment create
command to deploy storage drivers to a specific Satellite-enabled IBM Cloud service cluster. - Updates the help text in various languages.
Version 1.0.275
Version 1.0.275 of the CLI was released on 26 May 2021.
- The
--region
option is now required for theibmcloud oc api-key reset
,ibmcloud oc credential get
, andibmcloud oc credential set
commands. - Adds the
ibmcloud oc cluster addon versions
command to list the Red Hat OpenShift versions that are supported for each add-on version, and deprecates theibmcloud oc addon-versions
command. - The
ibmcloud oc image-security disable
andibmcloud oc image-security enable
commands are now generally available. - The IAM token that is used for your CLI session is now refreshed 5 minutes before expiration to keep the session active.
- Adds the
--cluster
option to theibmcloud sat storage assignment create
command to assign to an individual cluster ID instead of a cluster group. - Adds
--location
as a required option to theibmcloud sat storage config create
command and an optional option to theibmcloud sat storage config ls
command. - Changes the
--config
option to--config-name
in theibmcloud sat storage config sc add
command. - Adds the optional
--output json
option to theibmcloud sat config get
,ibmcloud sat config ls
, andibmcloud sat config version get
commands. - Increases the maximum size for the file in the
--read-config
option of theibmcloud sat config version create
command from 1MB to 3MB. - Fixes the
ibmcloud sat group create
command to enable cluster group creation. - The IAM token that is used for your CLI session is now refreshed 5 minutes before expiration to keep the session active.
- Updates the help text in various languages.
Version 1.0.258
Version 1.0.258 of the CLI was released on 26 April 2021.
- Adds the
--ip
option to theibmcloud oc nlb-dns create vpc-gen2
andibmcloud oc nlb-dns rm vpc-gen2
commands to support DNS records for Network Load Balancers for VPC. - Adds the
--dns-type
option toibmcloud oc nlb-dns create
commands to specify the DNS provider type for the subdomain registration. Currently, onlypublic
DNS is supported. - Adds a warning that the
--region
option is planned to be required for theibmcloud oc api-key reset
,ibmcloud oc credential get
, andibmcloud oc credential set
commands as of 10 May 2021. The region is already required by the API. Currently in the CLI, the region defaults to the targeted region if the--region
option is not used. - In the output of the
ibmcloud oc addon-versions
command, changes theMin. OpenShift version
column toSupported Openshift Range
. - When
--output json
is specified for theibmcloud oc storage attachment get
oribmcloud oc storage attachment ls
commands, fixes the output so that a volume table is not printed after the JSON output. - Fixes a
golang
vulnerability for CVE-2020-28852. - Adds the
ibmcloud sat storage config sc add
,ibmcloud sat storage config sc get
, andibmcloud sat storage config sc ls
beta commands to create and view your own storage classes of Satellite storage configurations. - Adds the
ibmcloud sat messages
command to view current messages from IBM Cloud Satellite. - Fixes a
golang
vulnerability for CVE-2020-28852. - Adds the
ibmcloud sat storage assignment upgrade
andibmcloud sat storage config upgrade
commands. - Updates the CLI help text in various languages.
Version 1.0.233
Version 1.0.233 of the CLI was released on 1 March 2021.
- Adds the
ibmcloud sat storage config rm
command to remove a Satellite storage configuration. - Removes
beta
tags fromibmcloud sat
commands for the generally available release of IBM Cloud Satellite. - Adds
satellite
as a supported provider to the output of theibmcloud oc cluster ls
command. - Removes
beta
tags fromibmcloud sat
commands for the generally available release of IBM Cloud Satellite. - General refactoring and improvements.
Version 1.0.231
Version 1.0.231 of the CLI was released on 25 February 2021.
- Adds the
ibmcloud sat service ls
command to view Satellite-enabled IBM Cloud service clusters in your Satellite location. \n 1. Updates the Go version to 1.15.8. \n 1. Updates the help text in various languages. - Updates the Go version to 1.15.8.
- Updates the help text in various languages.
Version 1.0.223
Version 1.0.223 of the CLI was released on 8 February 2021.
- Adds the
ibmcloud oc worker-pool label set
andibmcloud oc worker-pool label rm
commands to set and remove custom Kubernetes labels for all worker nodes in a worker pool. - Adds several commands and command changes for managing Red Hat OpenShift clusters in Satellite.
- Adds the
ibmcloud sat storage
command group to view and manage the storage resources that run in Red Hat OpenShift clusters that are registered with Satellite Config. - Adds the optional
--ha-zone
option to theibmcloud sat location create
command to specify three arbitrary zone names in your Satellite location. - Adds the optional
--reset-key
option to theibmcloud sat host attach
command to reset the key that the control plane uses to communicate with all the hosts in the location. - Moves
ibmcloud sat config configuration
commands to theibmcloud sat config
command group. - Moves
ibmcloud sat config subscription
commands to theibmcloud sat subscription
command group. - Renames
cluster-group
commands and--cluster-group
options togroup
. - Renames
configuration
commands and--configuration
flags toconfig
. - Renames
--type
options to--file-format
. - Renames the
--label
(short form-l
) option in theibmcloud sat host assign
,attach
, andupdate
commands to--host-label
(short form-hl
). - Adds the
ibmcloud oc worker-pool create satellite
command to add worker pools to Red Hat OpenShift clusters in Satellite. - Adds the
ibmcloud oc zone add satellite
command to add zones to Red Hat OpenShift clusters and worker pools in Satellite. - Adds the optional
--host-label
,--pod-subnet
,--pull-secret
,--service-subnet
,--workers
, and--zone
flags to theibmcloud oc cluster create satellite
command. - Adds the
satellite
value to the--provider
option in theibmcloud oc zone ls
command to list zones in your Satellite location.
Version 1.0.208
Version 1.0.208 of the CLI was released on 18 December 2020.
- Updates the help text in various languages.
Version 1.0.206
Version 1.0.206 of the CLI was released on 10 December 2020.
- Adds the
ibmcloud oc ingress lb get
,ibmcloud oc ingress lb proxy-protocol disable
, andibmcloud oc ingress lb proxy-protocol disable
beta commands to manage the configuration of load balancers that expose Ingress ALBs in your cluster. For example, you can enable the NGINX PROXY protocol so that client connection information is passed in request headers to ALBs. - Adds the optional
--endpoint
option to theibmcloud oc cluster config
command to specify a type of endpoint for the cluster context, such as the cluster's private cloud service endpoint. - Updates the help text in various languages.
- Updates the Go version to 1.15.6.
Version 1.0.197
Version 1.0.197 of the CLI was released on 18 November 2020.
- Adds a warning message to the
ibmcloud oc cluster config
command about temporaryoc
command failures due to RBAC synchronization. - Ensures that incident IDs are returned with 500-level messages.
- In
ibmcloud oc cluster storage
commands, the cluster name is now accepted in the--cluster
option in addition to the cluster ID. - Updates the output of the
ibmcloud oc ingress alb migrate
command to be more readable. - Adds the
--endpoint
option to theibmcloud oc cluster config
command to use the Link endpoint URL for the cluster context. - Updates the help text in various languages.
Version 1.0.178
Version 1.0.178 of the CLI was released on 6 October 2020.
- Updates the Go version to 1.15.2.
- Updates the help text in various languages.
- Adds
http-tunnel
as a supported source or destination protocol in theibmcloud sat endpoint create
andibmcloud sat endpoint update
commands.
Version 1.0.171
Version 1.0.171 of the CLI was released on 24 September 2020.
- Shifts all existing
ibmcloud oc cluster feature
commands into theibmcloud oc cluster master
subcategory. - Adds the cluster
Status
, thePod Subnet
, and theService Subnet
fields to the output of theibmcloud oc cluster get
command. - Updates the help text in various languages.
Version 1.0.157
Version 1.0.157 of the CLI was released on 24 August 2020.
Added commands: The following commands are added.
- Adds the
ibmcloud oc cluster ca create
,ibmcloud oc cluster ca rotate
, andibmcloud oc cluster ca status
commands to manage the rotation of certificate authority (CA) certificates for your cluster components. - Adds the
ibmcloud oc ingress secret
set of beta commands to manage Ingress secrets in your cluster, such as creating secrets for TLS certificates that are stored in IBM Cloud Certificate Manager. - Adds the
ibmcloud oc ingress alb migrate
set of beta commands to migrate resources that are formatted for ALBs that run the Red Hat OpenShift on IBM Cloud Ingress image to resources that are formatted for ALBs that run the Kubernetes Ingress image. - Adds the
ibmcloud oc ingress alb enable
andibmcloud oc ingress alb disable
commands. - Adds the optional
--version
option to theibmcloud oc ingress alb create
command to specify the Red Hat OpenShift on IBM Cloud Ingress image version or Kubernetes Ingress image version for the ALB.
Renamed commands: The following commands are shifted to new naming categories.
- Shifts all existing
ibmcloud oc alb
commands into theibmcloud oc ingress alb
subcategory. - Changes the names of the following options in the relevant
ibmcloud oc ingress alb
commands:--alb-id
to--alb
,--secret-name
to--name
, and--user-ip
to--ip
.
Deprecated commands: The following commands are deprecated in favor of the new commands.
- Deprecates the
ibmcloud oc alb cert
set of commands. - Deprecates the
ibmcloud oc alb configure
command. - Removes the deprecated
ibmcloud oc alb rollback
command,
Version 1.0.143
Version 1.0.143 of the CLI was released on 6 August 2020.
- Adds the
ibmcloud oc quota ls
command to list all quota and limits for cluster-related resources in your IBM Cloud account. - Deprecates the
--json
option. To print a command output in JSON format, use the--output json
option instead. - Deprecates the
-s
option. To not show the message of the day or update reminders in command output, use the-q
option instead. - Updates
ibmcloud oc cluster ls
command so that if you include the--ouput json
option but don't include the--provider
option, only classic clusters are returned. - Corrects the example master update command that is displayed in the output of the
ibmcloud oc cluster get
command when a master update is available. - Adds information about the effects of worker node replacement in the warning message for the
ibmcloud oc worker replace
command. - Standardizes the help text for options that have a list of supported values.
- Updates the help text in various languages.
Version 1.0.118
Version 1.0.118 of the CLI was released on 7 July 2020.
- Deprecates the
ibmcloud oc cluster user-subnet add
,ibmcloud oc cluster user-subnet rm
, andibmcloud oc va
commands. - Updates the Go version to 1.13.12 for CVE-2020-7919.
- Fixes a bug for downloading the Calico configuration by using the
--network
option in theibmcloud oc cluster config
command. - Updates the help text for the
--endpoint
option of theibmcloud oc kms enable
command. - Updates the help text in various languages.
Version 1.0.99
Version 1.0.99 of the CLI was released on 15 June 2020.
- Adds the
--cos-instance
option to theibmcloud oc cluster create vpc-gen2
command to back up the images from your Red Hat OpenShift internal registry to a bucket in your IBM Cloud Object Storage instance. - Updates the help text in various places.
Version 1.0.94
Version 1.0.94 of the CLI was released on 9 June 2020.
- Adds the
ibmcloud oc cluster addon enable static-route
andibmcloud oc cluster addon disable static-route
commands to manage the Static Route add-on for your cluster. - Adds the
ibmcloud oc worker-pool taint set
andibmcloud oc worker-pool taint rm
commands to set and remove Kubernetes taints on worker nodes in a worker pool. - Beta: Adds the
ibmcloud oc storage
set of commands to view and modify storage resources in your cluster. - Moves the
ibmcloud oc locations
command to theInformational Commands
group in the help output ofibmcloud oc
. - Updates the help text for options in the
ibmcloud oc nlb-dns monitor configure
command. - Updates the help text in various languages.
Version 1.0.84
Version 1.0.84 of the CLI was released on 26 May 2020.
- Fixes bugs for credentials in Kubernetes configuration contexts:
- When you download the contexts for clusters that run Kubernetes version 1.17 or later, those contexts are merged into your
kubeconfig
file. The tokens from the version 1.17 or later contexts now don't overwrite tokens for any version 1.16 or later contexts. - Credentials are now correctly added to your
kubeconfig
file when you download the context for a cluster. - Fixes credential issues for CLI plug-in installations on macOS that don't use
cgo
.
- When you download the contexts for clusters that run Kubernetes version 1.17 or later, those contexts are merged into your
- Adds commands for creating and managing VPC clusters.
- Adds the Ingress Status and Ingress Message fields to the output of the
ibmcloud oc cluster get
command. For more information about these fields, see Checking the status of Ingress components. - Adds the ALB ID to the output of the
ibmcloud oc alb create
command. - Adds the supported
Auth version
to the output of theibmcloud oc alb versions
command. - Adds the supported range of Kubernetes versions that your cluster must run to the output of the
ibmcloud oc addon versions
command. - Updates the help text in various languages.
Version 1.0.57
Version 1.0.57 of the CLI was released on 7 May 2020.
- Adds a check for deprecated positional options.
- Updates the macOS DNS resolver to fix network issues when you use the CLI plug-in with a VPN connection.
- Help documentation updates:
- Adds instructions for enabling or disabling an add-on to the help text for the
ibmcloud oc addon-versions
command. - Clarifies optional and required options in option help text.
- Updates the help text in various languages.
- Adds instructions for enabling or disabling an add-on to the help text for the
Version 1.0.28
Version 1.0.28 of the CLI was released on 6 April 2020.
- Adds the optional
--alb-id
option toibmcloud oc alb update
so that you can specify IDs of individual ALBs to update. - Adds the optional
--show-storage
option toibmcloud oc flavors
to show additional raw disks that are available for SDS worker node flavors. - Adds a message to the output of
ibmcloud oc pull-secret apply
about the amount of time it takes for the pull secrets to be applied to your cluster.
Version 1.0.15
Version 1.0.15 of the CLI was released on 24 March 2020.
- Adds the
ibmcloud oc nlb-dns secret regenerate
andibmcloud oc nlb-dns secret rm
commands to help you manage secrets for NLB subdomains. - Adds the optional
--worker-pool WORKER_POOL
option toibmcloud oc zone rm
. - Deprecates the option to specify a YAML file in the
--file
option of theibmcloud oc cluster create
andibmcloud oc worker add
commands. Instead, specify values for your cluster in the supported options for these commands. - Fixes the following bugs:
- For
ibmcloud oc cluster rm
, the--force-delete-storage
option no longer sets the-f
option.
- For
- Updates the help text in various languages.
Version 1.0.0
Version 1.0.0 of the CLI was released on 26 March 2020.
- Introduces permanent behavior and syntax changes that are not compatible with earlier versions.